027 4414 152
Operations Manager
07-843 4915
Office
[email protected]
Tawa Commercial Park, Hamilton
Location
Operations Manager
Office
Location
Getting an automotive surface ready for a new finish means removing everything that could compromise the work that follows. At Hamilton Blast & Paint, we sandblast frames, parts, panels, and other vehicle components, stripping away rust, old paint, and stubborn buildup to leave a clean surface ready for restoration or refinishing.
Whether you’re rebuilding a project vehicle, restoring individual components, or preparing automotive equipment for a fresh coating system, our team can handle the surface preparation. With workshop facilities and mobile blasting available for suitable projects throughout Hamilton and the wider Waikato, we can recommend a practical approach based on what you’re working on.
Old coatings can conceal more than faded paint. Corrosion, previous repairs and surface deterioration may only become apparent once the existing layers have been stripped away. Sandblasting efficiently uncovers the substrate and gives you a clear starting point for the work ahead.
Using the appropriate abrasive and controlled blasting techniques, we can target coatings and corrosion across complex shapes, joins and recessed areas that are time-consuming to prepare by hand. Once cleaned, the component can be properly inspected and moved on to repairs, priming or refinishing with fewer unwanted materials left beneath the new coating.
Strip corrosion, ageing paint and accumulated grime from frames and chassis components before restoration, repair or recoating.
Prepare suitable steel panels and body sections using a carefully selected blasting approach based on their condition and construction.
Give steel wheels, brackets, suspension parts and other removable components a thorough clean before refurbishment or refinishing.
Remove weathered coatings, rust and buildup from trailers, fabricated vehicle equipment and larger automotive items ready for a new finish.
Automotive components vary considerably in material, thickness, shape and condition. We consider these differences before deciding how to prepare each item.
We inspect the component and its existing finish, checking for corrosion, coating buildup, previous repairs, and areas that may require particular care. This helps us understand what needs to be removed and how to treat the surface.
We select the appropriate blasting media, pressure, and technique for the job. Our automotive sand blaster operators work across accessible surfaces to remove unwanted material while accounting for the characteristics of the underlying substrate.
After blasting, you have a clean surface that makes it easier to identify repairs and move on to the next stage of the project. Depending on your requirements, that could mean fabrication work, priming, repainting, or applying a protective coating.
We understand that automotive components need a considered approach. Our team adapts the blasting process to each item rather than treating every surface the same way.
Bring suitable parts and components to our workshop, or talk to us about mobile blasting for larger automotive projects. We service Hamilton and locations throughout the wider Waikato.
Not sure whether abrasive blasting is appropriate for your project? We'll assess what you need prepared and recommend a practical solution before the work gets underway.
A great finish depends on what sits underneath it. We remove unwanted coatings and contamination so the surface is properly prepared for whatever comes next.
From a set of components to a larger restoration project, thorough preparation gives you a better foundation for the work ahead. Hamilton Blast & Paint provides sandblasting with careful attention to the surface, the item and the result you’re working towards.
Contact our team for a free estimate and talk to us about workshop or mobile blasting for your project in Hamilton or the wider Waikato.
We can prepare a broad range of suitable tems, including frames, chassis components, steel wheels, brackets, suspension parts, body sections and trailers. Talk to us about the particular item you have, and we can advise whether blasting is the right option.
Yes. Abrasive blasting can remove layers of old paint as well as corrosion and stubborn surface buildup. This leaves the underlying material exposed so its condition can be assessed before restoration or refinishing continues.
It can be suitable for certain panels, but surfaces vary in thickness, material and condition. We assess the item first and select an appropriate blasting method rather than applying the same process to every component.
Yes. For suitable projects, our mobile equipment allows us to bring our blasting capability to sites across Hamilton and the wider Waikato. This can be particularly useful for larger items or projects that are inconvenient to transport.
Contact us today to request a quote tailored to your project’s needs.
Tawa Industrial Estate,
103 Tawa Street,
Melville, Hamilton 3206